top of page

H11 LED Bulbs for Low Beam and Fog Lights (also H9 and H16)

Writer: LightsUp
LightsUp
2 days ago
3 min read

Quick answer: H11 is a single-filament bulb used for the low beam or the fog lights on many cars. H9 (high beam) and H16 (fog lights) belong to the same family but have different tabs, so order the exact size printed on your bulb.

About the H11 bulb

  • Base: PGJ19-2

  • Halogen power: 55W

  • Same family: H8 (35W), H9 (65W), H16 (19W) – similar shape, different tabs

  • Typical use: low beam, fog lights

LightsUp H11 LED bulbs

Magic App Control LED bulbs – H11 LED bulbs

Magic App Control LED bulbs – change colour temperature and brightness and switch on a strobe effect from your phone over Bluetooth. Built-in CAN bus, up to 4× brighter than halogen.

Best for: drivers who want a modern look and full control from the phone.

CORE150 LED bulbs (150W) – H11 LED bulbs

CORE150 LED bulbs (150W) – 75W per bulb, 150W per set. Bright white light and an external driver box for better cooling. Plug & play, CAN bus ready, no app needed.

Best for: maximum brightness when there is room behind the headlight for the driver box.

Also available

  • H11 Magic Strobe bulbs – effect bulbs in white, orange, red or blue with a constant or strobe mode. May not work correctly on modern CAN bus cars.

Which H11 LED bulb should I choose?

  • Want the brightest light? Choose CORE150, if there is room behind your headlight for the driver box.

  • Want to change colour and brightness from your phone? Choose App Control.

Cars that use H11

These are some of the cars covered by our bulb size guides that use H11. Tap a car to see all of its bulb sizes.

FAQ

Can I use an H11 LED bulb instead of H8, H9 or H16?

These bulbs look alike, but the tabs on the base are different, so they are not a direct swap. We sell H8, H9, H11 and H16 as separate options – choose the size printed on your old bulb.

Will H11 LED bulbs cause a dashboard error?

App Control and CORE150 are CAN bus ready, which is designed to prevent flicker and bulb-out warnings on newer cars.

Can I use H11 LED bulbs in my fog lights?

Yes – many cars use H11 for the fog lights. Check the code on your fog light bulb first.

Are the bulbs sold as a pair?

Yes, every set contains two bulbs – one for each side.

Check before you order

Check the code printed on the base of your current bulb or in your owner's manual before ordering. Not sure? Send us a photo of your bulb to info@lightsup.pro and we will confirm the right size for you.

Not sure which size your car uses? Try our Bulb Finder – pick your make, model and year and see the right bulbs in seconds.

Other LED bulb sizes

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page